American Services commercial refrigeration repair in St. Louis knows that when it comes to organizing your cooling and refrigeration system for your commercial restaurant, it may not be one of the most exciting tasks on your list of things to do, but did you know that the efficiency of your cooling system will be maximized if you organize the food properly?
A poorly arranged freezer and refrigeration system could even cause your equipment to work harder than it should and wear out quickly as well as raising your utility bills.
Commercial refrigerators and freezers require a specific organized method for efficiency to be maximized. This includes installation of interior pan rack slides and shelves.
With just a few changes in your commercial refrigeration system, you can increase safety and cleanliness and prevent hot spots, follow the tips below;
1. Space food items appropriately and be sure to allow adequate space between food boxes so cold air can properly circulate.
2. Refrain from storing food items on the floor- make sure all items are located at least 6 inches higher than the floor by using shelving units or dunnage racks in your walk-in cooler.
3. Be sure to keep meat stored on the lowest shelf to ensure that any spills will not end up thawing and contaminating other food items.
4. Store the fresh produce away from fans which could potentially damage fresh food resulting in freezer burn.
5. Use stickers with dates on every product and keep the newest items stored in back to ensure that the oldest food gets used first to avoid spoilage.
6. Label refrigerator shelves to keep storage organized and to make identifying food quicker for employees.
Keeping your commercial refrigerator clean and well organized will save time and money in the long run while at the same time ensuring safety and longevity of the food quality.
American Services heating and cooling service in Saint Louis knows that most radiant cooling systems are based on aluminum panels that are extended from the ceiling through which cooled water is circulated.
In order for this system to effectively cool the office area, panels must be kept at a temperature near the dew point within the office building and the interior space must be dehumidified. Condensation will occur in humid climates where radiant cooling systems are utilized, even when there are brief periods of exposure to the outside air within the office space. An auxiliary air conditioner may be needed to keep the humidity level low enough.
Where the climate is arid, such as in the southwest, these radiant cooling systems are advantageous particularly in the ceilings of adobe buildings where the inside air can be maintained at a steady cool temperature.
Offices built on concrete slabs are also considered some of the best candidates for radiant cooling, using the same principal as ceiling systems with chilled water systems in the floor, as well as radiant heating systems. This option is a great choice particularly with office spaces that have existing radiant floor systems. Humidity continues to be a concern with radiant floor cooling systems, particularly on floors that have carpet coverings instead of the preferred choice for radiant cooling systems-which is ceramic tile. Condensation is common in areas with heavy carpet, which also limits the temperature at which the floor can be lowered to.
These systems can be very cost effective even when utilized with auxiliary cooling systems which can be used at off peak hours, reducing overall electricity demand for the business.
American Services commercial heating maintenance in St. Louis knows that the overwhelming majority of offices and buildings in the U.S. are presently heated with natural gas. This is no surprise, given the fact that this resource is domestically abundant. That coupled with the rising prices of fuel oil and electricity means that around 57% of us use natural gas as a primary home energy option. Electric heating is a clear secondary option, with right around a 25% usage. After that, there is 11% fuel oil, 4% gasoline, and 3% other home heating usage.
Overall, heating and cooling your home will account for around 54% of your utility budget. Properly upgrading and maintaining your equipment is one way to help save a good deal of money. The energy saving awareness resource, energy.gov, recommends a whole-house approach to energy conservation. They warn that simply purchasing an “energy-efficient” furnace is just one part of a more comprehensive plan to lower utility costs.
To help with the process, they provide tips to energy users to do as much as they can to ensure that they are getting the most for their money. A programmable thermostat is an obvious component here. Having one allows you to vary interior temperature during hours of sleeping and when not at home accordingly. Cleaning and swapping out furnace filters regularly is a cheap and easy way to make sure that the heating system is functioning to capacity.
There are additional tasks to stay on top of. Simply keeping south-facing windows unobstructed to allow sunlight in during the day and closing them to keep chills out at night helps. Speaking with contractors and building suppliers can zero you in on energy-efficient products. Annual Fuel Utilization Efficiency (AFUE) rating is a transparent measure of a furnace’s efficiency. Any particular furnace has to achieve a minimum of 78% AFUE to be sold in America. Those labeled as Energy Star models exceed 90% AFUE.
American Service restaurant equipment installation near Fenton knows that from classic cubes to specialized nugget ice, there is a commercial ice machine for any operation. When shopping for a commercial ice maker, take the time to consider what type of ice cube machine would best suit your operation. Restaurants, bars, hotels and even medical clinics and hospitals all have different requirements.
Besides ice types and sizes, there are other factors to consider as well when selecting the right ice machine. Yield, storage capacity and filtration factor into the decision-making process as well. Cubed ice, flake ice and nugget ice are all possibilities here. Flake ice is often used for food display applications. Cubed ice makers are further broken down into full-cube producing and half-cube making versions. Nugget ice is pellet-sized and perfect for frozen drinks or for carbonated beverages.
Ice is something that establishments can’t afford to be short on, so calculating maximum daily usage and making sure to buy a machine or machines that can out-produce demand is vital. It is estimated that 1 and ½ pounds of ice per person in a restaurant setting. Hospitals, on the other hand need to produce around 10 pounds of ice per bed, while hotels need to have machines that can whip up 5 pounds per day, per room.
As for the types of machines, there are under-counter, cube ice, combination ice, flake ice, and nugget machines to choose from. Undercounter ice machines are convenient because they make and store ice in the same unit. Cube ice-makers create ice with a larder surface area for slower melting. Combination machines make store and dispense ice and flake ice-makers are good for keeping food temperatures low and are more visually appealing when on display. Finally, nugget ice machines produce a more chewable type ice, otherwise known as pellet ice or pearl ice.
American Services HVAC heating and cooling installation in St. Louis knows that with energy costs continuing to rise, now is the perfect time to start looking for alternative cooling methods to cool your plant this summer. Instead of relying solely industrial air conditioning systems which need to run constantly, you will find other types of cost effective solutions available, which can actually help lower your overall energy costs.
One option you can explore is installing industrial high pressure water systems, which use water vapor to providing a cooling effect. Some models can even lower surrounding air temperatures by as much as twenty degrees without the use of any other type of cooling.
The costs to operate different types of alternative industrial air conditioners can be lower than one might expect. For instance, one option is a 24-inch fan has an operational cost of $0.055 per hour with a CFM of 6,920 and a 100 foot throw. There are certainly other energy efficient cooling products available as well, or you can have a custom system just for your facility.
Protect your employees, processes and equipment from their hottest environments with portable air conditioner solutions. Portable AC units help reduce the risk of heat exhaustion and increase your employee morale, leading to improved manufacturing quality and productivity. Spot cooling units prevent product defects by eliminating warping and condensation due to excess heat and humidity. Portable cooling units are known to reduce processing time by up to 94% for most heat related production processes.
According to one expert in the industry, “We have a very hot warehouse in the summertime and have a number of applications for the portable air conditioner system that has proven successful for us for the last two years and we are looking to add several more units to our warehouse facility.”
Contact us today at American Services heating and cooling installation service in St. Louis today for a quote on a new cost effective cooling system for your facility today.
American Services Industrial Heating service in Missouri knows that industrial heating is often the second highest single expenses spent on in a business setting. Any heating system that needs to be replaced should always be replaced with an energy efficient model of some sort. The difference in these models can save you a ton on your monthly bills and they can then help your profit margin.
One way to help save money on industrial space heating is the use of programmable thermostats. Although this is not a new option, it can certainly help to lower costs. Another quick fix to the energy needs of a large company is to simply maintain the current system and to keep it in good repair.
Geothermal heating system using heat from the Earth’s soil to heat a building is growing ip popularity. This natural, renewable source of energy is another option that should be considered is solar heating. Solar heating water to warm a building is another viable option that can be very cost effective. Finally, more and more warehouse owners and managers are opting for highly efficient furnaces using renewable energies like corn. If your facilities are located in an agricultural region, this might well be a very good option, since heating with corn is nowadays the cheapest way of warming an industrial space.
More and more interested parties are paying close attention to the topic of energy usage. As prices keep increasing alternative industrial space heating options become highly important topics to consider. By taking advantage of some of them you may find that not only your costs can diminish and your needs for repairs decreases too. When the time comes to repair the broken product, it would be wise to carefully consider one or more alternative industrial space heating options.
American Services restaurant equipment repair near Webster Groves knows that vending machines made in recent years are significantly more complex than when they first were produced. What once was a simple mechanical machine is now a technologically advanced computerized piece of equipment, often able to accept debit cards and credit cards. That being said, a professional repair person may be required to make all but the simplest of adjustments. If the machine or machines in question happen to be under warranty, there may be restrictions about what can and can’t be done to fix it. Refer to the manufacturer for assistance before attempting any repairs in such situations.
The simplest fixes should be the first ones inspected. If the machine is plugged in, but not receiving power, plug it in another electrical socket and check for blown fuses or tripped circuits associated with the place of operation. If power isn’t the issue, but the equipment isn’t functioning, open it up and make sure that a can or bottles isn’t wedged in the mechanical chute or access window. Then presence of jammed coins is another quick fix that you’ll want to look for. Bill acceptors, coin mechanisms, credit relay devices are further components that could need to be fixed or repaired.
Beyond that, temperature could potentially be the issue. If this is the case it could be a simple matter of adjusting the temperature control mechanism. If the wrong products are being dispensed, the dispensing mechanism need to be checked, which is likely to be a task better suited to a service-person. Likewise, wiring may require the presence of an electrician. Vending machine repair specialists are typically not hard to locate and would be happy to help with your beverage machine repair, running and generating revenue again.
American Services HVAC installation service near Ladue knows that roof curb is a metal sheet made to fit around a chimney or vertically aligned vent on your roof, otherwise known as a flashing. The roof curb is either one single metal sheet with a beveled or curved bottom lip. A roof curb extends up vertically in one piece. This products primary function is channeling water away from the seam formed between the roof and the vertical chimney or vent.
According to its webpage, Thybar has been in the business of making sheet metal products for over half a decade. According to Greg Mazurkiewicz’s recent article on archnews.com, “these insulated curbs for metal buildings are custom designed to accommodate any rooftop equipment and to conform to any roof pitch, the company says. The curbs are fabricated using 14- and 18-gauge AZ-55 Galvalume material with welded construction, built-in diverter, and integral conforming notches for compatibility with Galvalume roof panels and a watertight seal, says the company. Factory-installed rigid insulation, 1 1/2-in. thick and 3 lb density, is included”.
Manufacturers, like Thybar, put out non-insulated pre-fabricated roof curbs as well. Both types come styled in different ways. Insulated and non-insulated curbs for insulated and non-insulated roof decks come with a 3-inch cant and variable step to match up with the thickness of the deck insulation. Varying degrees of customization and specification is available.
Associated optional features with these building components are numerous. They include height addition specifications, heavier metal gauges, aluminum construction and galvanized stell or aluminum liners. There are also options that include; factory installed burglar bars and construction to fit both single and double roof pitches. Additionally there are chemically treated wood nailers as well as overhanging wood nailers on certain groups of curbs.
American Services heating and cooling repair in St. Louis knows that as it is stated on the website energy.gov, “Radiant heating has a number of advantages.” It is more efficient than baseboard heating and usually more efficient than forced-air heating because it eliminates duct losses. People with allergies often prefer radiant heat because it does not distribute allergens like forced air systems can. Hydronic (liquid-based) systems use little electricity, a benefit for buildings off the power grid or in areas with high electricity prices. Hydronic systems can use a wide variety of energy sources to heat the liquid, including standard gas- or oil-fired boilers, wood-fired boilers, solar water heaters, or a combination of these sources.”
One type is air-heated radiant floors. Since air can’t hold large amounts of heat, air-heated floors are not cost-effective in residential construction. Sometimes they can be combined with solar air heating systems. However in these situations, heat is only produced in the daytime. It is inefficient to attempt to heat a home with a conventional furnace by pumping air through the floors at night, even with the benefits of using solar heat during the day.
Hydronic systems can use a wide variety of energy sources to heat the liquid, including standard gas- or oil-fired boilers, wood-fired boilers, solar water heaters, or a combination of these sources.” . Electric radiant floors can also be used for home additions if it would be difficult to use the existing heating system in the new space,
Hydronic, or liquid-based, systems are the most widely used and cost-effective radiant heating systems for in cooler climates. Hydronic radiant floor systems pump heated water from a boiler through tubing laid underneath the floor. Hydronic radiant heat is certainly a topic that can be an efficient energy option for builders to use in a variety of different construction scenarios.
American Services commercial Refrigeration systems near Collinsville IL knows that refrigeration systems can consume a great deal of energy in businesses such as grocery stores and refrigerated warehouses. With the increase in demands and federal regulations for a reduction in energy consumption, many organizations have developed refrigeration programs to aid in the transition from inefficient systems to efficient ones.
A typical company will have multiple refrigeration units ranging in efficiency ratings. A proper assessment of your company’s units will reveal systems that do not or will not meet efficiency standards. A licensed professional can conduct an energy audit and map out your entire system, showing areas of concern and areas of immediate change. Along with measurements in refrigeration energy efficiency, many companies will provide an audit on the lighting systems as well to further enhance your energy plan. Typical changes to systems include anti-sweat heater controls, electronic commutated motors, refrigerator fan controls, and custom interior lighting.
When seeking a company to perform an energy audit, there are many companies that offer a no-cost, no-obligation facility audit. The customer is provided with recommendations and estimates of energy savings, project cost, payback periods, and incentive amounts available based on the audit. These companies make their money if you decided to follow their recommendations and have them perform the work. Installation of systems and equipment that are performed by licensed organizations will first send out an engineer who will first perform a pre-installation inspection to verify all aspects of the project. Trusted contractors will then implement projects followed by a post-installation inspection by the company’s engineer again. This will ensure all work is completed correctly.
For an assessment of your refrigeration needs in St. Louis and surrounding areas, contact American Services today.