To clean or not to clean is the first question we delved into rather deeply in the previous handful of posts here, on behalf of your St Louis Cooling Service near Belleville IL. We have determined that much of the answer lies in personal preference and mostly in individual heating and cooling system circumstances. Let us assume that you do plan to pursue professional cleaning of your St Louis HVAC near Belleville IL. “If you decide to have your heating and cooling system cleaned, it important to make sure the service provider agrees to clean all components of the system and is qualified to do so.” We have found in our recent research that cleaning only some of the system is a waste of time as is replacing a full system without determining the source of the issue, assuming you are dealing with something bigger than dirt, such as unwanted creatures or mold.
In your heating and cooling system in St Louis, as it pertains to cleaning ducts, we find that this will refer to the cleaning of various heating and cooling system components of forced air systems, including the supply and return air ducts and registers, grilles and diffusers, heat exchangers heating and cooling coils, condensate drain pans (drip pans), fan motor and fan housing, and the air handling unit housing.
Also, sometimes the need for an HVAC clean lies in the inappropriate installation and maintenance of your heating and cooling system in St Louis near Belleville IL. “If not properly installed, maintained and operated, these components may become contaminated with particles of dust, pollen or other debris. If moisture is present, the potential for microbiological growth (e.g., mold) is increased and spores from such growth may be released into the home’s living space.” Therefore, often times the aftercare of your system is directly related to the quality of the installation of your HVAC in the first place. Look for someone recommended and qualified, such as your St Louis Cooling Service and Sales near Belleville IL when it comes time to purchase and install the original system or address a replacement HVAC.
We are now broaching the second post within the same subject of HVAC systems and whether or not to have them cleaned. We ended the previous post on mold scenarios and how, obviously, if you have mold in your HVAC in St Louis near Fenton, then you need to consult an HVAC service company in St Louis in order to have it cleaned or to have someone referred to you for cleaning.
A few final mold pointers for you, found online, are as follows, “If you have insulated air ducts and the insulation gets wet or moldy it cannot be effectively cleaned and should be removed and replaced. If the conditions causing the mold growth in the first place are not corrected, mold growth will recur.” Now, we will move onto other scenarios by which it is wise to have your heating and cooling in St Louis near Fenton cleaned by professionals. Say, for example, your ducts are infested with rodents, insects or other vermin. You will definitely want to consult heating and cooling services in St Louis if that describes your situation.
A third and less unusual situation will involve your St Louis Heating and Cooling Ducts being clogged with excessive amounts of dust and debris and/or particles (more than the average system). This describes an HVAC that definitely needs heating and cooling service near Fenton to be cleaned thoroughly for optimum performance. “If any of the conditions identified above exists, it usually suggests one or more underlying causes. Prior to any cleaning, retrofitting, or replacing of your ducts, the cause or causes must be corrected or else the problem will likely recur.” So, don’t let someone talk you into full replacement from the start as this will not necessarily address the cause of your predicament and will likely get you back in the same boat.
Having a clean environment for your employees and customers is always a top priority and that’s why adding regular heating and cooling system clean-ups is so important. This type of cleaning process will ensure that the indoor air quality is optimal for those whom you serve. Here are the top two reasons why you should consider cleaning your heating and cooling system.
Energy Savings – When your heating and cooling system is clear of contaminants, it can work more efficiently with less energy. In fact, it is estimated that a dirty system contributes to the 25 to 40 percent energy wasted by the average unit. Regularly cleaning your system will allow it to work less, do it’s job better, and will even add life to your equipment.
Air Quality – Your indoor air quality matters. Dander, dust, and chemicals are just a few of the contaminants that build up over time. When you don’t consider this build-up, occupants will start to notice the indoor air quality diminishing. The only way to effectively remove this contaminated build-up is to have a professional properly clean your system using a negative pressure approach. Keeping up with this cleaning process is the only way to keep those with respiratory conditions, autoimmune disorders, or environmental allergies comfortable and free of symptoms.
Don’t miss this important step when serving your commercial heating and cooling system near Overland. In fact, the team at American Services can visit your place of business and help you with a number of HVACR services that will benefit your bottom line. We offer 24/7 service, a full lineup of specialties, and free estimates. This means we can take care of all your needs, save you time, and save you money. Don’t worry with the condition of your heating and cooling equipment any longer. Contact the American Service team now and get the peace of mind you deserve.
Before you call out a commercial heating contractor near Edwardsville, take a look at these common troubleshooting tips.
Problem #1 – My furnace isn’t producing heat. This issue could be from a number of sources. First, check your thermostat setting. It should be set at a temperature higher than the current house temperature reading. If that looks good, make sure the batteries are in working order. The next step is to take a look at your actual furnace unit. Is the switch on or near the furnace in the “on” position? It should be. You will also want to make sure the fuse or circuit breaker isn’t indicting a problem. Another issue found on older furnace units is a burned out pilot light.
Problem #2 – Frequent On/Off Cycles. The easiest solution to frequent cycling can be solved with a new filter. Change your dirty one and see if that helps. If you still experience the problem, call your HVAC technician so that he can check for a faulty thermostat or blower motor issue.
Problem #3 – Noisy furnace. Noises that create a popping or banging sound are most likely caused by expanding and contracting air ducts and isn’t an issue. On the other hand, if you hear squealing or grinding, you may have a more serious issue. Time to call out the experts.
Problem #4 – Not producing enough heat. Again, this can be due to a dirty air filter (see why changing those is such a big deal). You could also have some vents that are blocked. Look around, change your filter, and see what happens. If you still feel like the heat being produced isn’t sufficient, call your American Services Tech.
If you decide the issue you are having is beyond your DIY abilities, the team at American Services can help! We off the most comprehensive service list in town!
At American Services, you can count on our team to provide the best HVAC-R sales, service, and maintenance work in St. Louis. Our extensive list of provided services includes:
- Soda system, coffee equipment, cappuccino machine, tea maker, and frozen concentrated beverage machine sales, installation, service, and maintenance.
- Gas repairs including thermostat calibration, pilot adjustment, pilot replacement, gas leak inspecions, steam boiler de-scaling, steam boiler change-outs, gas pressure tests, and more.
- Electric repairs including equipment rewiring, amperage draw checks, impact for loose connections, and inspecting wire terminals for oxidation and overheating.
- Equipment sales and repairs including the following brands: AccuTemp; Garland; Rankin Delux; Globe; Reynolds; Southbend; Star; Jade; Dito Dean; Eagle; Merco; Waste King; Embergol; Wolf; Frymaster; and many more.
- Refrigeration services for: commercial refrigeration; industrial refrigeration; process refrigeration; walk-in freezers; walk-in coolers; supermarket refrigeration; display cases; convenient store refrigeration; restaurant refrigeration; and laboratory refrigeration.
- Ice machine and water filtration services that maximize equipment performance, reduce downtime, reduce repair costs, assure manufacturer warranty compliance, and reduce the formation of lime/scale and mineral build-up.
- HVAC services like: AC maintenance; AC repair; AC replacement; heating replacement; heating repair; indoor air quality; preventative maintenance; air duct free system; gas furnace; heat pumps; and zoning products.
Our full-service approach means you can count on the fact that our professionals can take care of all of your HVAC, Cooking Equipment, Refrigeration, Ice Machine, Industrial Equipment, and Beverage Systems needs. We truly are your one-stop-shop for restaurant equipment sales and support near Belleville, IL!
Don’t delay a repair or maintenance service any longer! Your procrastination will only cost you added time and money in the long run. Call our office to schedule your appointment today!
American Services commercial HVAC service in MO knows that Air duct free systems are a smart way to add air conditioning to multiple rooms without having to perform invasive installations of conventional duct systems. The systems will cost around $1,000 to $2,000 per unit and do an excellent job of cooling. In addition, the sound level is better than a conventional window air conditioning unit.
Air duct free systems, also known as ductless split HVAC systems are a matched combination of an outdoor condensing unit and an indoor fan coil unit by refrigerant tubing and wires. These systems are compact and take up very little space in the room. Additionally, they do not obstruct windows. New designs of ductless split HVAC systems are aesthetically designed to blend with room decor and new technologies with these systems ensure low sound levels.
HVAC air duct free systems are relatively inexpensive compared to modifying existing structure to run conventional air ducting. Specifically, the use of ductless systems are excellent for add-ons to current space or if you have a special space that requires varying environmental controls from the rest of the location. Additionally, if your current system is not able to handle modifications or additions, ductless systems are a viable option.
These type of HVAC systems are now being incorporated into many historical renovations where preserving the look of the original aesthetics in the structure. Requirements set on historical properties typically will not allow structure modifications even though they may have no cooling systems.
When assessing your location, look into a ductless HVAC system as an alternative to conventional methods.