Posts tagged fenton

HVAC Breakdown

nitty grittyMost homes, businesses and offices are heated and cooled through a central, whole-building, Heating, Ventilating, and Air-Conditioning system (HVAC). The HVAC may well be one of the most expensive and energy hungry systems in the home or office, so the more you know about your HVAC, the better. A well-informed homeowner or business owner will save money and have a healthier, more comfortable home or office, so we are here to help fill you in on some of the HVAC details on behalf of your Heating and Cooling Maintenance in St Louis near Fenton MO.

There are several components in which to consider in your St Louis heating and cooling system. Central HVAC systems are often called “split” systems because some of the components are installed inside the home and some of the components are installed outside a home. Inside your home, usually installed in the basement, attic, or a closet, you’ll find the furnace (oil, gas, or electric) and the evaporator portion of the air-conditioner. “You’ll also find the blower (sometimes called an air handler), which serves both the furnace and the air-conditioner. Attached to the blower are ducts, which are tubes acting as pathways to deliver heated or cooled air to various rooms in the house.”  The more you know about the structure of your St Louis Heating and Cooling system, the more likely you are to handle things that come up, whether it be in a do-it-yourself fashion or through the help of a commercial HVAC company such as your St Louis Cooling sales and service near Fenton MO.

The air-conditioner’s (or heat pump’s) condenser/compressor unit is installed outside the home or office in all cases. The furnace, evaporator, and blower are installed inside the home or office in each scenario. You will not have a separate furnace for an HVAC with a heat pump, just FYI.  As we fully explain the components of HVAC in St Louis, you will want to stay tuned here for further details, both simple and complex.

 

Not All Furnaces Are Created Equal

efficientIn an effort to finalize and summarize our recent series of posts on behalf of your St Louis Heating and Cooling installation and sales near Fenton MO, we are here today to say that of all the ways in which you can stay abreast of technology that will save you money in the HVAC world, the one way, besides the last money saving technology is to make sure you understand not all systems are created equally.

There are some systems that are much better than others at running efficiently.  Here is what one set of writers has to say on the subject in an article we found on behalf of our research being done for your St Louis Heating and Cooling sales near Fenton, “Not all furnaces and air conditioners are created equally. Just like different cars have different gas mileage, different HVAC systems use different amounts of energy to heat or cool a home.”

You may be interested in knowing that heating efficiency is measured by the Annual Fuel Utilization Efficiency rating (AFUE). It measures the amount of energy that is used by your furnace that is actually turned into heat. For example, an AFUE of 80 percent means that 80 percent of the energy a furnace uses is turned into heat and 20 percent of the energy is wasted, so obviously, the higher this number, the better.  If you buy a modern day furnace, or have done so in the recent past, then you should know that for furnaces manufactured after September 2015, the Department of Energy mandated a minimum AFUE of between 80 to 84 depending on the fuel type and whether the furnace is designed for a mobile home or permanent structure.  Beyond that, the numbers have to be displayed clearly on the package.  So, you likely have a more efficient furnace if it was purchased in the recent past. If you find yourself in need of a smarter heating solution in St Louis now or in the future, come visit your St Louis heating and cooling sales experts near Fenton today.

 

Range Options For Your Restaurant Equipment

commercial rangeWhen it comes to buying restaurant equipment, you will have several different appliances to purchase for your new business venture and knowing just where to start can be a tad bit stressful to say the least.  It is best, probably, to seek out some professional assistance in the form of advice and product reviews before you set out on the venture of St Louis Restaurant Equipment Sales near Fenton MO.

Here is the first bit of information we found on behalf of your St Louis Restaurant Equipment near Fenton.  “The range is one of the most versatile pieces of equipment in a commercial kitchen, with the ability to fry, grill, broil, saute, boil, braise, simmer, warm and even bake! Whether you are opening a new restaurant and are considering the purchase of a range, or looking to replace the one you currently have, this handy guide will walk you through the most important purchasing considerations to help you select the best product for your needs!”  We found this guide to be rather helpful and so we will use it here throughout our writing, on behalf of your St Louis Restaurant Equipment Repair near Fenton.

There are two basic types of ranges in the industry and are usually referred to as “Restaurant Ranges” and “Heavy Duty Ranges”, which may also be called “Master Series” or “Modular” ranges. Restaurant Ranges are the most common type between the two and are focused on ease of use and durability when they are being designed.  On the other end, the heavy duty ranges are more designed for higher volume uses and so, depending on your needs, you may be better off with one of these types in a restaurant environment.  “Heavy Duty ranges are designed for higher volume usage, and boast more durable construction, and often are available with more features and options.”  We will elaborate further in the next post, here, on behalf of your Restaurant equipment sales and service in St Louis MO.

Room Heaters for Your Extra Space

heaterHeating a less than usual space, are you?  Well, here we go, then, we want to pass along some of the valuable information we have managed to gather in the area of heating and cooling in St Louis near Fenton MO.  We are now up to the idea of buying and using a room sized electric heater.  This is a great option for heating a small room in your finished basement.  “Let’s say you have a small home office or maybe a “crafts” room or a guest bedroom.”  You may need this room to be warm in the winter but not want to take up all of the space that a portable heater does on an everyday basis.

Your heating and cooling installation and repair in St Louis is sure that you will want to consider one of the portable room size heaters as an alternate source for heat, especially if you have one room in particular that never seems to receive the heated air that the rest of the basement is able to benefit by.  “And, perhaps the heat from the rest of the basement just never quite makes it into this extra room; which is a strong possibility if it’s walled off and has a door.”

What you may need, when space consumption is an issue, is a small, single room heater, that takes up almost no space, costs almost nothing to run and presents almost no fire risk whatsoever.  There are units like this on today’s market and we have found some in our research on behalf of your St Louis heating and cooling sales near Fenton.  You may want to look at heaters like the Econo-Heat 400 watt Wall Panel Convection Heater. This one is described in the following way, by one of the sources we found online who had great things to report about this solution on behalf of your heating and cooling sales near Fenton MO, “In brief, it’s an electric heater that’s flat and sits on the wall. The key to it’s goodness is that it draws cold air from the floor and heats it, causing a natural rotation without using an electric fan. There are no moving parts.”

Elaborating Further on Heat Pumps and Central AC

defineMoving onto the second phase of description we are planning on behalf of your St Louis Heating and Cooling installation near Fenton MO, we still have much to explain about your cooling system in your home.  Your air conditioner, to be precise, and though we told you the basics when it comes to the system and how it uses energy to remove actual heat from your space, unfortunately, it isn’t quite that simple.  The process gets quite a bit more complicated with all the controls and valves involved, its effect it rather amazing.  “An air conditioner takes heat from a cooler place and dumps it in a warmer place, seemingly working against the laws of physics. What drives the process, of course, is electricity — quite a lot of it, in fact.”

Our first type of cooling system to discuss, namely because it is the most common, are the central air conditioners and heat pumps designed to cool the entire house. “In each system, a large compressor unit located outside drives the process; an indoor coil filled with refrigerant cools air that is then distributed throughout the house via ducts.”  Heat pumps are then like central air conditioners with the exception of the cycle direction variations.   “Heat pumps are like central air conditioners, except that the cycle can be reversed and used for heating during the winter months.”  We will go into more details on behalf of your St Louis Heating and Cooling sales near Fenton, in regards to heat pumps below.

With a central air conditioner, the same duct system is used with a furnace for forced warm-air heating. In fact, the central air conditioner typically uses the furnace fan to distribute air to the ducts, so there is an overlap and therefore efficiency existent in the system by its simple nature.  Central air conditioners and air source heat pumps in their cooling mode of operation are rated according to their efficiency in the seasons.  We will break down these details in the next couple posts here, on behalf of your Heating sales in St Louis near Fenton MO.

Stop the Heat Leak

stopWe discussed weatherstripping in our last post here on behalf of your heating and cooling service in St Louis near Fenton and the ways in which you can minimize excess cost and heat your space most efficiently by making sure you have this in place and that you swap it out for new stripping every few years.  There are other things that pertain to the efficiency of heating and cooling your home.

You can and should adjust your door thresholds, according to the research we did recently on behalf of your St Louis Heating and Cooling service near Fenton MO.  “If you can see daylight under your front door, then you’re losing the indoor air you’ve paid to heat. ‘If the door is not in contact with the threshold, the air is going right under the door,’ Rogers said.”  There are adjustable thresholds that can do the trick, with screws that allow for you to change the height of the actual threshold, thereby eliminating or reducing gaps that are allowing for air to escape.  “A little light in the corners is okay, but don’t raise the threshold so high that it interferes with opening and closing the door. And the door shouldn’t drag on the threshold or it’ll wear out the weatherstripping.”

Electrical boxes in your exterior walls are also known for being drafty because insulation isn’t always placed behind and around them in the correct fashion. “You want to try to stop air from flowing around the box and through the box,” Rogers says.  Removing the cover plates and filling the small gaps around the boxes with acrylic latex caulk, will typically do the trick according to the information gathered on behalf of your Heating Sales in St Louis MO.

Say No To Allergens in Cooling

allergensWe discussed in the previous post here, on behalf of your St Louis Cooling sales near Fenton MO, that in order to reduce allergens for those who suffer from attacks, and even those who just wish to breathe cleaner, fresher air, it is a good idea to keep the space around your St Louis HVAC system free from dust and debris. There is more, however, in the way of action you can take to help clean the air you use in your St Louis Heating and Cooling service.

Using a high quality air filter for your furnace is a great idea, but also making sure to change it out on a regular basis in order to keep it working for you.  Here is what one online source has to say about the subject of cooling air and how to keep it clean via proper filtration, “Using a good quality filter in your furnace is a great defense against allergens. Buy filters with at least a MERV 8 rating. These types of filters tend to trap microscopic particles and reduce allergens. Be sure to check your filters regularly and replace them at least once every 3 months. Dirty filters can make your system less efficient and more hazardous to the health of those with allergies.”

It is important to inspect your HVAC system for mold as well, especially if you keep your house moist or humid for any reason. “If you see a small amount of mold build up, you can likely take care of removing it on your own. However, if there is a larger presence, call a professional. Installing a whole-house humidifier or updating your HVAC system can be another option to help solve chronic humidity problems.”  Make sure you are maintaining your current HVAC system, according to your Heating and Cooling in St Louis near Kirkwood, routine maintenance can make all the difference in your allergen reduction as well. “Spring is an optimal time to call us and schedule your yearly HVAC maintenance. We can make sure that your system is ready for the warmer months ahead and ensure that it’s free from dust and allergen blockages.”

A Good Restaurant Comes From the Heart

heartSo, you are considering opening up your own St Louis Restaurant near Fenton?  Well, you will want to make sure that you read and research as much as you can on the ins and outs of having a successful venture.  On behalf of your St Louis Restaurant Equipment sales and service near Fenton, we are researching and reporting some of what we know about the ability of having a successful experience in this arena.  Hopefully you will find some or all of the following information helpful to your new restaurant journey.

“Food is a pretty universal source of joy and comfort. It spans all cultures, nations and even species — every living thing shows appreciation in some way for a good meal. The preparation of food is an integral part of every culture, and the reactions to it are nothing short of inspirational.”  This helps explain, a little bit, the “why” of opening a new restaurant in St Louis, now, onto the how.

You must begin under the correct pretense that every business needs certain things, and it’s best to approach problems structurally and with a complete plan. There are a few keys you’ll need to beginning a successful restaurant in St Louis near Fenton, or anywhere, for that matter, especially if you want the place to stay open for more than one year.  Passion may be the first key factor, according to your St louis Restaurant Equipment Service near Fenton, without it, you will lose interest in the level of work involved in maintaining a restaurant and all of its needs.   One thing is for certain, those who open restaurants to become rich, rarely if ever, succeed.  This business does not yield high financial profit, especially not in the first several years.  Most people are lucky if they break even in the beginning and or profit enough to survive modestly at best.

Commercial Refrigeration Restaurant Needs

refrigerationWhen opening a new restaurant in St Louis near Fenton, you will need to arm yourself first with all of the necessary restaurant equipment.  That can be a costly and very involved endeavor, to say the least.  Today, on behalf of your St Louis Restaurant Equipment Sales and Install near Fenton, we begin your journey with free advice in this realm.  Our journey begins with your commercial refrigeration needs since all new restaurants will need this at the top of their restaurant equipment list.

There are different styles and make ups for the commercial refrigeration world.  The most popular are reach-ins.  “Reach-in refrigerators are the cold-storage workhorses of commercial refrigeration, used in nearly every commercial kitchen to keep the most frequently accessed foods nearby. They can include up to 3 sections with solid or glass doors and can be used for storing everything from fresh produce to bottled drinks.”  One plus here, according to your St Louis Restaurant Equipment sales near Fenton, is that by design, these refrigerators are prepared to be opened frequently.  “Many are designed to be “working boxes” and will maintain safe temperatures when they’re opened frequently. Some have half-sections with Dutch doors for increased organization and energy efficiency.”

When your restaurant equipment list involves a refrigerator that will be in the public eye and possibly used by your clientel, then glass door models are popular there, according to our recent research on behalf of your Restaurant Equipment Maintenance in St Louis near Fenton.  “Glass door merchandisers are used front-of-house in restaurants and in retail stores for displaying packaged foods to the public. These have self-closing, swinging, or sliding doors, and most have bottom-mounted refrigeration systems, making them easy to access for cleaning and maintenance.”  Other models and designs will be discussed in the next post, here, on behalf of your St Louis Restaurant Equipment sales and service.  Stay tuned for more details!

Reducing Greenhouse Emissions in Cooling Changes

climate changeWe can talk more, if you will, about the movement in the St Louis heating and cooling sales world, about GWP.  “GWP is a basic measure of a compound’s potential to trap heat in the atmosphere, also known as the greenhouse effect, when compared to carbon dioxide. R-410A, a widely used HFC refrigerant, has a GWP that is 2,088 greater than carbon dioxide. R-407C, another popular HFC, has a GWP of 1,774.”  In order to accommodate the atmosphere and do less damage to our ozone, it is important to find chemicals that do the least amount of destruction. According to our St Louis Heating and Cooling near Fenton, and the research and writing we do on their behalf, it is possible to continue to find refrigerants that cool with less and less damage to our atmosphere.

In global news on this subject, from your heating and cooling company in St Louis we found the following:  Later this year policy makers from 197 nations will be meeting in Dubai to finalize an agreement on how to phase down the use of HFCs in developed and developing countries and promote the use of low-GWP alternatives.

A little more than two years ago there was a release in the White House of the President’s Climate Action Plan, which is also very pertinent to this discussion.  In it was a regulatory blueprint for the production of cleaner energy, a more efficient transportation system, the promotion of energy efficient appliances and buildings, and the reduction of non-emissive greenhouse gases. The broad scope, or goal of this plan was to reduce (and still is) to reduce the greenhouse gas emissions, bringing them down to 17% less than they were in 2005, all by the year 2020.  Stay tuned for further details on how the St Louis Heating and Cooling industry near Fenton can play a role in helping this cause.