Skip to main content

Geothermal Heating and Cooling

Geothermal Heating and Cooling

geothermalWhen we are looking into different ways to cut costs both at home and in our commercial business, heating and cooling can be a great area of focus.  There are nonconventional ways to accomplish the heating and cooling that you are looking for that we researched completely on behalf of your Cooling installation in St Louis near Fairview Heights IL.

First recognize that the earth is brimming with a limitless source of energy – also known as geothermal.  The explanation of this begins deep inside our planet where you would find a lot of hot water and steam. The deeper you go, the hotter it gets, in fact. But you don’t have to dig too deep to take advantage of this energy, according to all that we read on behalf of your St Louis Cooling Sales near Fairview Heights IL. Only a few feet below the surface, actually, the temperature of the water remains constant year round, generally about 42 to 80 degrees Fahrenheit (5.56 to 26.67 Celsius) depending on where you live.  A geo-exchange system can use this energy to heat and cool almost any kind of building [source: Minnesota Geothermal Solutions].

Here is further explanation based on our recent research on behalf of your Cooling Service near Fairview Heights IL in St Louis MO.  “Geothermal systems do not directly tap into the heat inside the Earth. Instead, geothermal homes use heat pumps to take advantage of the constant temperature of geothermal wells under the ground. The heat pump can cool a house in the summer and warm it during the winter. Heat pumps have a fluid inside, which could be water or a refrigerant. When it is cold outside, the fluid absorbs Earth’s heat and brings it inside to warm the air.” In the summertime, the heat exchange works in reverse, cooling the house [source: APH Geothermal].

Advantages Behind Geothermal Heating and Cooling Systems

Advantages Behind Geothermal Heating and Cooling Systems

A see-saw, scale or balance with the words Advantage and DisadvaWhen someone mentions geothermal heating and cooling, what is your first response?  Do you understand how these highly efficient systems work or are you someone who has never taken them into consideration?  Either way, it’s undeniable that deciding on geothermal heating and cooling is a very “green” choice.  In fact, when you consider all of the advantages of these non-traditional systems, being green is at the top of the list.  Today, let’s take a quick look at just some of the advantages to having a geothermal heating and cooling system.

As mentioned above, geothermal units are very green.  This means they are efficient and friendly to our environment.  Thanks to their green qualities, running a geothermal unit is also very cost-effective.  Here is a listing of some of the reasons why geothermal units are an advantage to those who are concerned for the environment and want to save money on heating and cooling costs:

  • Geothermal systems get rid of 3 million tons of carbon dioxide from our atmosphere on a yearly basis.  This is an amount equivalent to removing 650,000 vehicles from the road.
  • Compared to conventional gas or oil heating units, geothermal heating and cooling systems are about 70 percent more efficient.
  • Individuals who use geothermal heating and cooling systems save around 70 on their home heating bills and about 50 percent on their home cooling bills.
  • Compared to a standard air conditioning system, geothermal heat pumps reduce both greenhouse gas emissions and energy consumption by up to 72 percent.
  • Compared to traditional heating and cooling systems, a geothermal heat pump used 25-50 percent less electricity.
  • Although the cost of installing a geothermal system is more expensive then the more traditional alternative, it will pay for itself within 5 to 10 years of installation.

Do you have more questions about geothermal heating and cooling near St. Charles? If so, simply contact the experts at American Services Commercial HVAC for more information today!

Geothermal Heating & Cooling Systems – How do they work?

Geothermal Heating & Cooling Systems – How do they work?

Clean Energy Concept Education as a Art AbstractGeothermal heating and cooling systems use the heat that is naturally created by the Earth to stabilize temperature.  These systems are highly efficient, have very little cost associated with daily use, and are a green form of energy.  Today, the team at American Services wants to give you a quick review of how these systems work. Let’s get started!

Under ground, the temperature of water holds at a steady, more comfortable temperature that averages between 42 and 80 degrees Fahrenheit depending on what part of the country you are in.  This temperature holds unchanged all year long despite the season or air temperature above ground.  Geothermal systems tap into that constant temperature via either a closed or open loop system and heat pumps. With a close loop system, a set of underground pipes are laid and filled with refrigerant.  The refrigerant then runs through the pipes (thanks to the use of a heat pump) and absorbs heat from the water underground.  In the winter, the system absorbs heat that is used to warm the air and in the summer the system absorbs the cold that is used to cool the air.  With an open loop system, the same process happens but instead of refrigerant pond or well water is used to transfer the hot or cold.

Geothermal systems are friendly to the environment because they use a naturally occurring source to regulate temperature.  These systems are more costly to install, yet the monthly energy use is much lower and results in more affordable energy bills.

At American Services, Florissant area commercial heating and cooling customers find all of the best choices available to the modern HVAC client.  Our team can discuss the benefits of all types of HVAC equipment and help you to make the best, most-informed decision for your business.  Be sure to call our team today to ask about how we can help you with all of your HVAC and refrigeration needs.

Maintaining Your Geothermal Heating System

Maintaining Your Geothermal Heating System

commercial heating in MOGeothermal heating draws on the latent thermal energy of the ground below your property to heat and cool buildings throughout the year. It is a growing trend in America and it is also popular in other areas of the world. For those who are familiar with geothermal systems, you may already know about one of its most important benefits: the system has minimal maintenance needs. While furnaces and air conditioners require frequent, routine maintenance to upkeep their performance and efficiency, a geothermal system tends to be much more durable.

There are a few things you should do to make sure your system continues to operate effectively. First, installation is crucial. If you want to be able to rely on your geothermal system year after year for excellent heating and cooling, then it needs to be professionally installed. Find a qualified HVAC company with experience with these types of systems. For commercial heating service in Missouri, American Services can assist.

As with any HVAC system, its size must match your property to prevent short cycling and extra wear and tear on components. Dirt and debris can damage any of the indoor parts of your geothermal system, from the heat exchanger to the blower motor. During geothermal maintenance, your technician has the opportunity to clean sensitive mechanical components so that your system will continue to work effectively. 

Your geothermal system relies on the cleanliness and integrity of your air ducts. If the air ducts that distribute the heated or cooled air throughout your home are leaking or damaged, your geothermal system will not be able to keep your home comfortable. There are various types of loop designs available for geothermal systems. It depends upon the unique circumstances of each project. What a maintenance visit can do for your pipes is make sure they are not leaking or in need of repair. Since these underground pipes are one of the most important components of your geothermal system, it’s important to make sure they remain in good condition.