Posts tagged hvac contractor

Down the Halls of HVAC

hallsLooking at heating in St Louis near Sunset Hills, we realize that is has been some time since we perused the halls of an HVAC explanation, looking for new details to point out surrounding your system in St Louis.  So, today, we stumble upon the heat exchanger. “The heat exchanger is found inside your furnace unit’s housing. This component switches on when the furnace is activated by thermostat to produce warmer temperatures in winter.” The way it operates is to pull in cool air, then heat it and circulate it by way of your ducts and our through your vents.

The heat exchanger pulls in cool air, heats it, and circulates the resulting heated air via your ducts and out through the vents.  The evaporator coil is another important heating component to understand.  It has, basically, the opposite job of the heat exchanger and it acts to cool the air when the thermostat is set lower and cooler during the summer months.  “Located in a metal enclosure on the furnace’s exterior, to the top or side, the evaporator coil works similarly to an automobile radiator to produce cool air, which is then circulated through the ductwork.”

Now, we move onto the condensing unit of your heating and cooling system in St Louis near Sunset Hills.  Connected to the evaporator coil, the condensing unit is installed by HVAC contractors on the outside of your home and filled with refrigerant gas in order to properly operate. “When the refrigerant has been cooled to a liquid by heat exchange with the exterior air, the condensing unit pumps the liquid to the evaporator coil to be evaporated into a gas once more.”  This leads us to your refrigerant lines which carry the refrigerant substance to the condensing unit vaporized in the form of gas and return it to the evaporator coil in liquid form.  In order to be resistant to temperature, these lines are typically made of copper or aluminum.

Heating Elements in HVAC

heat exchangerLooking at heating in St Louis near Sunset Hills, we realize that is has been some time since we perused the halls of an HVAC explanation, looking for new details to point out surrounding your system in St Louis.  So, today, we stumble upon the heat exchanger. “The heat exchanger is found inside your furnace unit’s housing. This component switches on when the furnace is activated by thermostat to produce warmer temperatures in winter.” The way it operates is to pull in cool air, then heat it and circulate it by way of your ducts and our through your vents.

The heat exchanger pulls in cool air, heats it, and circulates the resulting heated air via your ducts and out through the vents.  The evaporator coil is another important heating component to understand.  It has, basically, the opposite job of the heat exchanger and it acts to cool the air when the thermostat is set lower and cooler during the summer months.  “Located in a metal enclosure on the furnace’s exterior, to the top or side, the evaporator coil works similarly to an automobile radiator to produce cool air, which is then circulated through the ductwork.”

Now, we move onto the condensing unit of your heating and cooling system in St Louis near Sunset Hills.  Connected to the evaporator coil, the condensing unit is installed by HVAC contractors on the outside of your home and filled with refrigerant gas in order to properly operate. “When the refrigerant has been cooled to a liquid by heat exchange with the exterior air, the condensing unit pumps the liquid to the evaporator coil to be evaporated into a gas once more.”  This leads us to your refrigerant lines which carry the refrigerant substance to the condensing unit vaporized in the form of gas and return it to the evaporator coil in liquid form.  In order to be resistant to temperature, these lines are typically made of copper or aluminum.

 

HVAC Control and Automation

control hvacYour St Louis HVAC installation and sales near Hazelwood is talking today about control and automation systems for industrial air conditioning and commercial air conditioning.  It is apparent that such a thing is responsible for delivering intelligence to HVAC systems. This intelligence helps you better manage your resources, schedule HVAC contractors and AC maintenance, and prolong overall product lifecycle—in addition to a number of other benefits according to many experts in the world of HVAC sales and service.

According to our research on behalf of your St Louis HVAC Service and Sales near Hazelwood, the benefits of utilizing control and automation systems for your industrial air conditioning and commercial air conditioning HVAC systems include: Consistency and comfort, lowering of utility bills, increase in property values, and less time spend on consumer complaints.

They overlap a bit, according to your St Louis HVAC sales near Hazelwood, with comfort and consistency also having to do with lower costs to operate.  “The computerized controls offered by automation systems can help maintain a more even temperature. This leads to lowered overall costs, without any ‘hot spots’ or cool chills.”  Costs being lesser also becomes apparent in the installation realm.  “On average, installing an automation system can decrease your utility bills by 15%. This 15% puts the savings around $.20 to $.40 per square foot. This significant savings can be used to offset the original purchase and setup costs—and then once the system is paid can be used for other HVAC-related costs like AC maintenance or repairs. The savings can also be put into a fund for future repair or replacement costs for your industrial air conditioning system. In some cases, the contractor may allow the payment of the control and automation system over time, allowing the savings to help pay for the control retrofit.”  Call your local HVAC installation and find out more.

Warm & Cozy Thanks to Proper HVAC Maintenance

Staying warm

Winter time is upon us in St. Louis and no matter what type of business you may have, keeping your employees and customers warm and cozy should be a top priority.  Since this is something that rings true for nearly our entire client base, the team at American Services wants to help you understand how you can achieve this goal without much worry, hassle, or cost.  The solution to this problem simply lies in scheduled maintenance visits! Today, let’s take a look at why maintenance is so important and go over a few of the top maintenance services you should be investing in.

Maintenance is key in the overall operation of nearly any large system around your business.  This fact rings especially true when talking about your heating and cooling units.  Both needs to be checked on a regular basis as determined by the manufacturer and your expert HVAC contractor.  These regularly performed check-ups cover all of the major inner-workings of your machines, keep your HVAC system clean, catch any repairs early, and even keep your unit running at its most efficient rate.  All of these things will help your system last as long as possible and work together to keep your costs low and under control.

Now that you know why maintenance is so important, let’s talk about the services you need to be investing in.  Any good HVAC maintenance check-up will cover:  Air Filter inspections with replacement or cleaning, ; a double check of your thermostat settings; tightening of all electrical connections; condensate drain inspection; controls check; and a double check of all gas connectors, gas pressure, burner combustion, and heat exchanger equipment.

So, why not take the time to ensure to comfort of your employees and customers by investing in an HVAC maintenance service near Florissant today!  Call the American Services team to schedule your appointment now!

Tips For Hiring a Heating & Cooling Professional

HVAC Techs

Are you looking to hire a heating and cooling contractor near Sunset Hills?  If so, keep these tips in mind when making your final decision!

  • Be sure the technician has plenty of experience with commercial heating and cooling equipment.  This doesn’t mean you have to hire the most senior technician, it just means that your tech should have had plenty of apprenticeship experience that put him or her along side a seasoned professional to gain exposure to the business.
  • Make sure you ask about and check your HVAC contractor’s credentials. These credentials include any licensure requirement for your city or state along with proper insurance.  A properly licensed tech will be up on all the latest training and code information and having proper insurance protects both you and the service technician in the event of an accident.
  • Look for technicians who have been trained on a number of major systems. This gives the tech versatility.
  • Asking for references is one of the best ways to snag up some of the best service you will ever get.  Ask your friends, family, and other commercial business owners for those who they would use time and again.  If you end up with a bid and no one to get a reference from, ask the tech.  Then call the references he has provided to see what his former clients have to say.
  • The final thing to consider is price.  Price should never be the first and deciding factor when making any large purchase.  Experience, customer service, and the quality of work are all more important.  Once you have a number of bids from trusted sources, you can start to look at price and make a final decision from there.

Contact American Services today for a free estimate on all of your heating, cooling, refrigeration, restaurant equipment, ice machine, ans industrial equipment service today!

Tips You Can Use To Avoid HVAC Scams

Scam Computer Keys

As if choosing the HVAC system you use at your commercial business location isn’t enough, now consumers also need to be on the lookout for scams that are designed to leave them with a system that doesn’t function at all.  The good news is that the HVAC team at American Services is here to help you avoid any practices that take your money and leave you without the system you need.  Here are just a few tips to avoid being scammed in the future:

  • Do Some Research – When choosing an HVAC professional, it is important to take your time and to do the proper research.  You will want to make sure that you have done your homework on the contractors you are considering and to not make any big purchasing decisions too quickly.  It’s always best to get multiple quotes, but a second opinion is the least you should commit to. Not getting a second opinion can leave you open to paying for work that you don’t need.
  • Know Your Contractor – As mentioned above, research is huge in the fight against being scammed by an HVAC contractor.  Any contractor you decide to hire should arm you with details concerning all of the aspects of the work you will be having performed.  They should also give you specific information regarding the equipment they are installing for you.  Any trustworthy contractor will want you to fully understand what equipment you are getting and the scope of the work being performed.
  • Ask Questions – Not only should you ask questions about the work that is being performed, but you should also be questioning any additives a company wants to put into your system.  These additives often cause more harm than good and are simply not needed.

Next time you are in the market for a new HVAC contractor near St. Charles, the trustworthy team of professionals at American Services are here to help!

 

Comprehensive Commerical Indoor Heating Unit Maintenance List

check list

Keeping up with the your commercial HVAC unit near Florissant is an important part of your winter to-do list.  Preventative maintenance will save you money on your monthly utility bills, keep your place of business warmed properly, and help to keep your equipment running longer.  When hiring an HVAC contractor to do such work, be sure that the following points are covered by the work they perform:

  • Inspect and clean the blower housing, blower wheel, and motor
  • Lubricate motor, inspect and replace fan belt on older model units
  • Clean any lint and debris from the combustion blower housing
  • Drain evaporator coil pan and condensate drain lines, clean as needed
  • Inspect gas units for gas leaks
  • Clean, adjust, and inspect burner assembly
  • Clean, adjust, and inspect ignition system and safety controls
  • Perform an inspection on the heat exchanger and heating elements
  • Check fuel system for signs of corrosion, proper attachment to the furnace, and for any dislocated sections.
  • Inspect control box along with it’s wiring, connections, and associated controls.
  • Replace air filter
  • Check ductwork for leaks
  • When starting the unit up, monitor the system for any uncharacteristic behavior, listen for abnormal noises, and be aware of any unusual odors.
  • In gas furnace units, monitor for correct line and manifold gas pressures and make any needed adjustments.
  • Inspect vent system to ensure proper operation

Once these maintenance tasks have been performed by a professional HVAC technician, you should receive a full report detailing all of the components that were checked, how they performed, and any adjustments/repairs that had to be made.  This is an important part of your maintenance service that will help you understand the current functionality of your unit and any changes that were made.

Contact the team at American Services to have your very own maintenance service completed today!

How To Avoid HVAC Scams

Scam Alert

The weather is cooling down and unfortunately that means you may find yourself in a bad situation with an not-so-honest HVAC company.  These companies are out to only take advantage of the coming season by offering a “deal” on certain maintenance or other services.  Often times the work that is done by these individuals is not up to code, can actually harm your system, and will end up costing you extra money down the road. Today, the team at American Services wants to help you spot these scams so that you can avoid them.  Let’s get started!

  • Tip #1 – Avoid door-to-door HVAC service salesman.  These individuals are often not from the area and are only looking to get paid and leave town. Many who decide to have such people do work for them are left with unfinished jobs or end up paying for a “needed” service that was not needed at all.
  • Tip #2 – Void telephone solicitation concerning HVAC work.  Telemarketing is just not something that most HVAC companies participate in.  Those who buy into these scams often pay for unnecessary work .
  • Tip #3 – Stick with a local company.  Hiring a local HVAC contractor who has been doing reputable work in the area for some time will help you to avoid a scam.  These individuals want to keep your business and to build a good reputation for their businesses.
  • Tip #4 – Be wary of anyone who can’t provide a business card, lacks a logo on their truck, and can’t offer you a physical business address and phone number.
  • Tip #5 – If a contractor is replacing a part in your system, ask to see the old part.  This will give you evidence that an actual repair was made.
  • Tip #6 – Get several bids for all jobs.  This will confirm to you that the repairs someone is claiming you need are actually necessary.

If you need winter weather HVAC service near O’Fallon, work with the most trusted commercial heating and cooling company in St. Louis – American Services!

Choose American Services As Your End-Of-Season HVAC Contractor

summer's end

At the end of each season, many commercial business owners look into the possibility of trusting a new HVAC team to complete any needed service, repair, or maintenance work. The possibility of letting another company win your business leaves you open to save some money and get your equipment in better shape for the future.  Today, the team at American Services wants to convince you of their ability to do all of that and more.  Let’s get started with the top five reasons why you should choose American Services as your end-of-the season HVAC contractor.

  • Reason #1 – Our Technicians.  At American Services we only employ the most knowledgeable technicians in the business and we make sure they stay that way with the latest training and certifications.
  • Reason #2 – Our FREE estimates.  At American Services we are always ready to give you a FREE estimate concerning any upcoming project you are considering. Your FREE estimate will tell you just how much you will need to spend and take the guess work out of saving for upcoming HVAC projects.
  • Reason #3 – Customer Service. – When you choose American Services you can know that you will always be met with the best customer care in the business. This includes interactions with our technicians, office staff, and other key team members.
  • Reason #4 – 24/7 Service.  At American Services our technicians are ready to take care of all of your emergency needs with 24 hours a day, 7 days a week service. This includes all holidays and weekends.
  • Reason #5 – Customizable Preventative Maintenance.  Our unique customized preventative maintenance contracts take the guess-work out of service contracts and only focus on the services you need – never anything extra, and that saves you money!

Call the team at American Services for a FREE Wentzville area heating and cooling maintenance service review before the cold weather arrives and your system isn’t ready!

How To Maintain Your Heat Pump

heat pump

The average lifespan of a heat pump unit is 15-20, but only if it is well-maintained by a professional HVAC contractor.  This means that simply installing your heat pump and using it won’t do the job if you want it to last.  Today, the team at American Services wants to give you the information you need to know about properly maintaining your heat pump.

Just like any other piece of HVAC equipment, regular scheduled maintenance is key in keeping your heat pump running smoothly.  This means you will need to have a maintenance schedule in place for your unit including a system cleaning and service check-up before both the winter and summer months.  It is also imperative that you chance your system’s air filter on a monthly basis and to clear any vegetation out from around the exterior unit just as often.

Getting your system on a maintenance schedule will serve you in a number of ways. First, when your unit is well-maintained it will run more efficiently.  This saves energy that equates to money saved on your utility bills.  In fact, a well-maintained heat pump system can save you up to 25 percent off your utility bills when compared to a neglected unit.  Secondly, maintaining your unit by keeping dirt, debris, and other vegetation away from it will allow your system to work as efficient as possible and extend it’s life.  This means you will be able to get closer to the full lifespan potential of your unit before replacement is need.  Finally, performing regular maintenance will help you in avoiding expensive repairs by finding issues early and resolving them.  This saves you money and makes your maintenance expenses very much worth it.

If you have a heat pump unit in need of maintenance this fall, the professionals at American Services commercial heating and cooling near Florissant can help.  Call today for a FREE estimated and get your heat pump ready for the winter season.