When we are looking at walk-in freezers for your commercial restaurant equipment list, we need to focus, also, on the most advanced portion of the animal, the refrigeration system itself. “The most complex part of the unit is the refrigeration system. To bring it down to basics, you’ll want to know how much power the system will need in order to operate, where that power will be coming from, and how much clearance and ventilation the system will need. All of these are things that could affect the configuration that you choose.”
The size you decide upon will have something to do with what the Commercial Refrigeration in St Louis near Maryland Heights requires. “Smaller walk-in coolers typically require a 1/2 hp compressor to hold temperatures at or below 41 degrees Fahrenheit. Walk-in freezers often need a larger compressor—around 1 hp—to maintain those colder temperatures.” Size and efficiency are a toss up and balancing act as they are in so many other industries as well. So, it is safe to assume that the larger the walk-in freezer, the more powerful the refrigeration system will need to be. This will discourage you from buying a freezer that is more space than you really need since you will give up not only physical real estate for it, but also more money, a larger refrigeration system and a higher cost to operate.
While shopping around, also keep in mind that your space may limit your options when it comes to the location of the refrigeration system, as it is not only the space of the freezer you need to consider, but that the refrigeration system increases in size as well. If you have a very low ceiling, or can’t install the proper ventilation, you may need to go with a side-mounted or remote configuration. Don’t forget that the ventilation takes up room too. Either way, if you call on experts, such as your St Louis Refrigeration Installation near Maryland Heights, what seems a bit overwhelming in terms of content and vastness of information, can be cleared up in a jiffy.
So, you just discovered that the pilot light on your furnace has gone out. What do you do now? Well, the best thing you can do is troubleshoot with the understanding that there are a few major causes that could be leading to this issue. Today, the team at American Services will explain four of these top reasons for a pilot light outage.
Before we get started, lets talk about safety. You will find that most systems have safe guards in place that automatically shut an appliance down when there is a pilot light issue. This is only a first line of defense in regards to your safety. It is important to always consult the owner’s manual and safety guidelines given by the manufacturer of your specific equipment before proceeding with any troubleshooting. When you start to feel like a task is over your head, stop and call in the professionals.
Now that you understand how to handle troubleshooting in a safe manner, let’s talk about two of the four most common reasons why your pilot light may go out.
- Condensation – In the case of condensation, your pilot light is going out due to extra moisture dripping on the pilot light and extinguishing the flame. Look for evidence of condensation that may be causing this issue.
- Air Supply – A draft, improper ventilation, or a lack of fresh air can all cause air supply issues that then cause your pilot light to extinguish. Look for obstructions that are blocking air flow or drafts that could be leading to the issue.
Come back next time when we continue this discussion and reveal the last two of our top reasons why your pilot light may be out!
The team at American Services provides professional heating and cooling service in the Florissant area. Give our team a call for a free sales, service, or maintenance estimate today!
The IAQ or indoor air quality in your commercial building is something that can suffer during the winter months as many try to create an airtight environment to help reduce winter heating costs. Yet, the practice of sealing out the cold air needs to be in balance so that the environment you and your employees are exposed to isn’t compromised. Use these tips that take the eliminate, isolate, and ventilate principals into account when considering your IAQ this winter.
First, you need to think of ways to eliminate contaminants from entering your indoor environment. Some simple ways to do that include: choose cleaning agents that are not made with chemicals that can be harmful to you and your employees; be sure to outfit your building with carpeting, furniture, and other finishings that are free of harmful chemicals; and make your indoor environment a cigarette smoke-free area.
Next, you will need to think of ways to isolate your indoor environment from contaminants. A few ways to isolate include: keeping any pollutant containing chemicals in an area separate from you and your employees; sealing any appliances in sealed combustion units; and inspecting all natural gas units for proper ventilation.
Finally, check for and ensure proper ventilation. This can be achieved by opening windows as the weather permits or by contacting your Bridgeton Area HVAC dealer about having a mechanical ventilation unit installed in your building. These units need to be sized and installed by a professional HVAC technician to ensure proper ventilation according to your building size.
Start taking your indoor air quality seriously and contact the team at American Services now! Our team can help you determine your IAQ needs for the winter and get all of the proper equipment installed quickly and at an affordable price. Contact our team at 314-733-1776 for more details about a free estimate today!
When you are considering the right features for your commercial HVAC system, don’t forget to factor in the importance of indoor air quality. The air you breath inside your business should be fresh and free of harmful pollutants and irritants. There are many options when deciding on how to tackle this issue. Let’s explore some of your options.
First, talk to your American Services HVAC experts about the proper ventilation plan for your building. Ask for recommended equipment such as driven cross-ventilation and stack ventilation that will ensure the proper flow of air. It is crucial that you get a professional’s opinion on this type of equipment to make sure the placement of any openings are properly sized and placed to meet your needs.
Be sure to also discuss the use of natural ventilation and operational windows as a supplement to the mechanical ventilation you are utilizing. Make sure to think about any outdoor pollutant sources or noise issues that may make operational windows not as desirable.
If you do decide to use operational windows to supplement your mechanical ventilation, keep the following points in mind: make sure your window openings are between 3 and 6 feet from the floor; ensure that the windows can be adjusted, closed tightly, and secured; and make certain that your window openings are placed so the you can maximize cross-ventilation.
The team at American Services are ready to help you determine the right HVAC ventilation system for your business. Call our professional HVAC experts near University City to get the attention and professional advice you need now! Our team is ready to serve you to the best of our ability. Give us a call today!
According to many within the HVAC industry, there are three main trends within HVAC today. These three trends include green initiatives, indoor air quality (IAQ), and emergency preparedness. Today, let’s take a look at how these three trends will play into your commercial HVAC service near O’Fallon!
When those in the HVAC industry talk green initiatives, most of the chatter revolves around the improvement of environmental air quality and the reduction of energy consumption. Improvements in these areas aren’t new to the industry, as both have been improved greatly in the last century thanks to advances in the areas of heating, AC, and ventilation. Yet, even more advancements are set to reduce heating and cooling loads even further – including the use of glass tinting to better regulate interior air temperature.
The next area that is trending within the industry revolves around indoor air quality. As homes and businesses continue to utilize better materials that seal-off outdoor air, concern for the air we breath continues to rise. This is a very valid concern and will require technicians to emphasize the need for proper ventilation while still utilizing energy efficiency upgrades. Look for a more advancements that will help with the monitoring and adjustment of indoor air quality in response to this issue.
Finally, emergency preparedness is an area that, if ignored, can cost businesses thousands of dollars in damage to structures, loss of productivity, and equipment replacement. The HVAC industry has realized this area of concern and has started to respond with solutions that will temporarily support equipment in a way that should remove the dangers mentioned above.
Thank you for joining the American Services team for this post today! Look for more posts on this material in the coming months!
Whether you are in the process of designing and building, retrofitting, upgrading, or adding to an existing facility, there is a wide range of solutions to meet your unique challenge. It is important to seek out the best available technology to preserve resources, slash heating and ventilation costs, and shrink your environmental footprint. For help with commercial HVAC installation near Chesterfield contact American Services for help.
For your next ventilation project, start with the premise that almost every building or enclosure requires some type of ventilation to prevent the buildup of harmful gases and contaminants. Fresh air is needed to replace stale air. New air is needed to replace exhausted air. At the same time, depending on the climate and season, tempered air is needed to satisfy your ventilation requirements. Design strategy to optimize indoor air quality (IAQ) by delivering cost effective, environmentally sensitive, reliable, and durable customer-driven solutions.
Proper ventilation requires also that there be a movement or circulation of the air within the space and that the temperature and humidity be maintained within a range that allows adequate evaporation of perspiration from the skin. It might be the case that the discomfort, headache, and lethargy commonly associated with poor ventilation were caused entirely by the increase in the amount of carbon dioxide and the decrease in the oxygen content of the air.
A simple roof ventilator is essentially an opening in the roof with a cover to keep out rain and to prevent winds from interfering with its functioning. Natural convection is an appreciable aid to ventilation in a large building only if it contains sources of large amounts of heat. A further useful adjunct is a fan in the roof ventilator. The addition of distribution ducts to the fan and a system for forcing air into the building provides greater efficiency.
American Services offers customizable preventative cooling maintenance in St. Louis County for many types of commercial establishments including; restaurants, hospitals, school, supermarkets, commercial offices, warehouse spaces, and more.
What many business owners may not be aware of is that fact that proper ventilation is the least expensive and most energy efficient methods of cooling buildings. The way that proper ventilation works is that it prevents heat build-up in your office or commercial building. Natural ventilation including spot ventilation, ceiling fans, or window fans may be the only method of cooling necessary, depending on your geographic location. For some areas that cool off sufficiently at night, simply providing ventilation to open your commercial space up and allow the outside cooled air in, can keep the area sufficiently cool when the temperature rises during the day.
Even in very hot climates, “interior ventilation is ineffective in hot, humid climates where temperature swings between day and night are small. In these climates, natural ventilation of your attic (often required by building codes) will help to reduce your use of air conditioning, and attic fans may also prove beneficial,” says Energy.gov.
There are 3 principals of ventilation for cooling that should be given attention when using this cost efficient method of cooling, including; keeping heat outside, using spot ventilation, and avoiding heat generating activities indoors when possible.
Landscaping the building to provide a lot of shade is another way of passively keeping commercial spaces cool without the need to reach in your pocket to pay huge energy bills. Using light colored materials for the roof will also help to reduce heat in your building by reflecting it. And last but not least, proper insulation will keep heat out during the day and trap the cool air from cool nights inside.
American Services HVAC installation near Fenton knows that the heating and cooling of a school can keep operating costs high, so it’s important to not only choose the right HVAC system, but to make sure it is being used properly. If you’re looking to drive heating and cooling costs down, then there are some steps you can take to make sure your HVAC system is operating efficiently.
One thing to always keep in mind is to use natural ventilation to help control costs and also to inject fresh air into the building. This is actually covered in a government stan dard for public buildings called, ASHRAE Standard 62.1-2010, which speaks to proper ventilation for indoor air quality. While this is a government mandate, it also can be utilized to cut down on costs. Natural ventilation can be used to control the ambient temperature in the building and also cut down on costs by cooling the space naturally. Of course caution must be taken to insure that outdoor pollutants are properly filtered and humidity is controlled. Otherwise contamination of the indoor air and mold from the humidity can begin to develop. An HVAC system with vent filtration and humidity controls will help to reduce or even eliminate any issues.
One possibility for brining in natural air actually serves a two fold purpose, skylights. Vented skylights with automated controls can be an expensive after construction addition, but during a build they can certainly be more cost effective. Skylights, especially in a school offer the benefit of natural light, which not only brightens up the space, but can also help to control energy costs. Adding vented skylights allows users to add natural light and outside air depending on outside air and weather conditions.
Putting natural air into a closed environment can benefit occupants and help to reduce costs. In this tough economy that just might be the solution schools need.
American Services Commercial Cooling Installation in Overland knows that if your work space is full of heat generating electrical components and electronic devices, then you will need some heat removal systems. The comfort and wellbeing of your employees and safe operation of your equipment will depend on this. Conditioned air and proper ventilation are essential steps in creating a safe air conditioned environment that removes heat and circulates fresh air.
Some examples of these commercial buildings might be Schools, IT firms or manufacturing plants.
There are two types of commercial and industrial air conditioning. Modern cooling system technology uses ductless or split air conditioning. This allows the cooling unit and condenser to be located in a different location most generally on the rooftop. The cooling is thermostat controlled. Ducted cooling systems are inefficient and no longer installed in commercial applications.
Air cooling, water cooling, glycol cooling, and chilled water cooling are just a few of the cooling technologies still available today
Air cooled systems: widely used for its convenient ductless setup. The condensing unit is usually located outside, this helps with the exchange of the fresh air and removing of hot air. Because the cooling pipes are limited in length consideration must be made between workspace and the roof.
Glycol Cooling systems: though a very sophisticated cooling system
which produces temperatures below 50 degrees Fahrenheit. The coolant used in this system is Glycol it can be implemented over long distances and provide cooling to many workspaces with one condenser. This system requires more maintenance and constant monitoring of quality and quantity of the coolant Glycol.
Water cool systems: a cooling tower is used cool water which gets pushed back to the heat exchanger in the work environment. Benefits are multiple workstations can be cooled with just one single cooling tower. The cost of maintenance of cooling tower and quality of water may not be the best economic fit for your building.
Chilled water systems have a greater heat removing capacity. Cools larger areas with a greater efficiency and it only requires one
chiller plant. Possible setbacks can be installation charges; these are “extremely expensive” systems. Another concern should be the removal of most the moisture in the air (employee health problems). Careful consideration of your current building and its infrastructure a combination of one or more of these systems can be used to provide your air conditioning cooling systems.