Skip to main content

Warehouse Refrigeration Standards

Warehouse Refrigeration Standards

American Services HVAC services in St. Louis knows that refrigeration in warehouse setting pose a number of challenges. Aside from the technical aspects of HVAC Refrigeration system design for warehouses, there are many standards which regulate the scope and applications of warehouse refrigeration systems. Understanding these standards are pivotal in maintaining productivity.

The intent of warehouse HVAC Refrigeration standards is to regulate storage space rather than quick chilling space or process equipment. It is important to recognize that there is often a variety for space types and equipment connected to a particular suction group in a refrigerated warehouse. This makes it difficult to identify compressor plant equipment that serve the storage space only. For the purpose of the standards, the compressor plant requirements apply when 80 percent or more of the design load connected to the suction group is to serve storage space, where a suction group is referred to one or more compressors that are connected to one or more refrigeration loads, that operate at a common suction pressure.

These standards apply to both coolers and freezers. Coolers are defined as refrigerated spaces cooled between 32 and 55 degrees where Freezers are defined as a refrigerated space cooled below 32 degrees. The Building Energy Efficiency Standards do not apply to walk-in refrigerators or freezers they are covered by the Appliance Efficiency Regulations. A walk-in refrigerator or freezer is defined as a refrigerated space of less than 3,000 square feet. The Standards are solely intended for storage space.

With a basic knowledge of your facility and the requirements for each set of standards, you are more capable of ensuring your operation meets the requirements set forth.

To get a quote on HVAC services in MO, contact us today at American Services.

Energy Efficient New Cooling Systems

Energy Efficient New Cooling Systems

commercial cooling repair in St. LouisAmerican Services Heating and Cooling installation in Missouri is pleased to announce that today’s commercial cooling systems are designed to be energy efficient and nearly maintenance free. In order to be installed in a commercial building, a cooling system must meet certain expectations and requirements. The contractor for commercial cooling systems must consider the following:

– Appearance, though not a major component in the technical aspect of installation , it remains important in the way a cooling system flows with the commercial building ,in other words all the ductwork being visible in the ceiling requires the cooling system be installed properly.

-Health, The commercial cooling system must ensure the protection and elimination of any dust, air or potential allergens found inside the building. This can protect from liability issues down the road by selecting a commercial cooling system that operates clean and quietly.

– Flexibility, Increasingly, customers are choosing commercial cooling systems that can be designed and adapted to energy efficient sources such as using a solar source as an alternate energy efficient source.

– Energy Efficiency is probably the most important aspect in the commercial cooling system installation process. Many industry experts agree the shift to integrate water for the making of such cooling systems is the most efficient system available today. This is based on water’s capacity to transport energy which is far superior when compared to air.

Considerations for the consumer:
– Superior climate control one that is energy efficient, will keep your organization’s cost low.
– Commercial cooling system options, single or modular units, roof or ground mounted.
-HAVC considerations, this system ties heating, air conditioning, and ventilation all into one system.
– Installation, Spare no expense when selecting your commercial cooling system installation contractor and as a result it will insure an energy efficient, clean, and environmentally green system.
For a quote on the best cooling system in Missouri for your business, contact American Services in St. Louis today, you won’t be disappointed!

Proper Installation of Commercial Cooling Systems

Proper Installation of Commercial Cooling Systems

cooling repair in MOAmerican Services Heating and Cooling Systems in Fenton knows that today’s commercial cooling systems are designed to be energy efficient and nearly maintenance free.

  • In order to be installed in a commercial building, a cooling system must meet certain expectations and requirements. The contractor for commercial cooling systems must consider the following:
    Appearance, though not a major component in the technical aspect, it remains important in the way a cooling system flows with the commercial building.  In other words all the ductwork being visible in the ceiling requires the cooling system be installed properly.
  • Health-the commercial cooling system must ensure the protection and elimination of any dust, air or potential allergens found inside the building. This can protect the contractor from liability issues down the road.  A commercial cooling system that operates clean and quietly.
  • Flexibility-Increasingly, customers are choosing commercial cooling systems that can be designed and adapted to energy efficient sources. For example, a solar source as an alternate energy efficient source might be considered.
  • Energy Efficiency- the most important aspect in the commercial cooling system installation process. Many industry experts agree the shift to integrate water for the making of such cooling systems is the most efficient system designed today. This is based on waters high capacity to transport energy, which is far superior when compared to air.

    Considerations for the consumer:
    – Superior climate control one that is energy efficient, will keep your organization’s cost low
    – Commercial cooling system options, single or modular units, roof or ground mounted.
    -HAVC considerations, this system ties heating, air conditioning, and ventilation all into one system.
    – Installation, spare no expense when selecting your commercial cooling system installation contractor. Following this process will insure an energy efficient, clean, and environmentally green system.